Pro-Plus Panel Saw

*Shipping TBD at time of order. Welding Mart will call with shipping charges after order is placed in order to get you the lowest possible shipping rates due to products size & weight.

Pro-Plus Panel Saw 64" Crosscut x 10' Wide Frame

The sawsystems proplus64 features are:
•_1-1/2 in Square Tubular Frame that is fully welded and Powder Coated. for the sawsystems proplus64
•_Interchangeable Rotating Saw Plate for the sawsystems proplus64
•_15 amp 3 hp Porter Cable Motor for the sawsystems proplus64
•_Vacuum Hose that attaches to saw motor for the sawsystems proplus64
•_1-3/4 in x 11 Ga. Wall, Nickel Chrome Track Tubes for the sawsystems proplus64
•_Cord Holder for the sawsystems proplus64
•_Carriage Return for the sawsystems proplus64
•_General Purpose 20 Tooth carbide saw blade for the sawsystems proplus64
•_Fence Floor Support Plates, 1 - Year Warranty on Parts for the sawsystems proplus64
•_Picture is shown with optional intermediate fence for the sawsystems proplus64

Manufacturer Information for the sawsystems proplus64

The Pro-Plus Model has all the features of the Professional plus an extra 12 inches of cross-cut

Includes

1. Rotating Saw Plate (pull two pins to rotate).
2. Dust / Safety Shield for saw motor.
3. 1-1/2” Square Tubular Frame that is fully welded and powder coated.
4. Carriage return that does not have to be assembled by you.
5. Cord holder.
6. 1-3/4 inch nickel chromed track tubes that are 1/8” thick.
7. Fence support plate.
8. General Purpose 20 Tooth carbide saw blade.
9. A backer board, for support and does not have to be removed to rotate the saw 90 degrees.
10. Factory Squared, Aligned and Secured so your Panel Saw is always in square.
11. Trigger Lock
12. Steel Hubs for Material Wheels.
13. Retraction Lock to prevent accidental movement of carriage plate.
14. Strip Plate to support cutting of small materials.
15. Easily replaceable 15 amp, Porter Cable saw motor.
16. Vacuum Tube Dust Collector and Hose.
17. Saw motor able to bevel and score cut.

Accessories Available

Razor Knife Cutter, Patent Pending
Router Plate that does not require clamps
Frame Extensions for 5 ft. Frame, Left and Right
Second Set of Track Tube Bearings
Horizontal Tape System with Stop
Spring Hold Down
Vertical Tape System with Rip Gages
Full Length Intermediate Fence Systems (for full or half frames)
Stand and Wheels


Saw Systems manufactures low cost, high quality, and accurate vertical panel saws and razor knife cutters for a wide variety of uses. Saw Systems panel saws increase your productivity at just a fraction of the cost and size of other, more expensive machines.

• Panel saws are much safer, quicker, and easier to use than their table saw counterparts.
  
• The saw blade is guarded behind the panel saw plate and by a blade guard on and off the panel saw.
  
• Fast, repetitive cuts can be quickly re-produced through the use of a stop bar and tape system mounted on the panel saw.
  
• Accurate, square cuts are made on the panel saw the first time, every time.
  
• Production costs are lower saving time and money.
  
• A wide variety of panel saw blades are available for a diversity of applications.
  
• All panel saws are palleted to prevent shipping damage and are immediately ready for operation.