Millermatic® 212 w/Spoolmatic 3035

All Miller Electric products are sold and serviced by Weld Specialty Supply Corp. an authorized Miller Electric Distributor.

Millermatic MIG Welder - NEW! Millermatic 212 with Spoolmate 3035 Spoolgun

Millermatic 212 MIG welder welds material from 22 gauge up to 3/8 in (9.5 mm). It's easy to set up, offers a wide window of operation, and delivers 210 amps of power for semi-industrial applications. The Millermatic 212 offers superior performance on thin and medium gauge metals, with smooth arc characteristics throughout its operating range.

With single-phase power plus a factory-installed running gear/dual cylinder rack, the Millermatic 212 easily goes where it's needed. The system adds efficiency and productivity to light fabrication work, garage/body shops, and farms and ranches. Its cost and operating economics make it a smart choice. Its ease of use makes it a very effective machine for the hobbyist.

Aluminum welding set up is easy with the direct hook up of the Spoolmate 3035. With Miller's exclusive Gun-On-Demand, simply pull the trigger for either gun and you're ready to weld.

Processes:
MIG (GMAW)
Flux Cored (FCAW)

Applications

• Light Fabrication
• Garages/ Body Shops
• Vocational/Technical Schools
• Farm and Ranch
  
  Features:
  
  
• Seven taps provide wider welding range of 30-210 amps with improved high and low ends to weld materials from 22 gauge up to 3/8 in (9.5 mm) thick in a single pass.
  
  
• New! Angled, dual-gear-driven, cast aluminum drive system features no-tool, quick-change reversible drive rolls and easy-to-set, scaled tension knob.
  
  
• New! Patent-pending EZ-Change™ Low Cylinder Rack allows operators to easily roll cylinders on and off of rack - no need to lift cylinders.
  
  
• Spoolmate™ 3035 spool gun for aluminum welding. Easy to install with direct hook up. And with Miller's exclusive Gun-On-Demand™,simply pull the trigger for either gun and you're ready to weld. No wasted time installing modules and using toggle switches.
  
  
• New! Thermal Overload Protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
  
  
• New! EZ-Access™ Consumable Compartment and Parameter Chart - convenient new flipdown compartment that provides fast access to parameter chart and consumables.
  
  
• New! Larger work area - now with longer 15-ft M-25 gun.
  
  
• Less weld cleanup with Active Arc Stabilizer - patented Miller design provides excellent starts proven superior to the competition.

Comes complete with:

• Spoolmate 3035 spool gun
• 10 ft (3 m) power cord and plug
• New! 15 ft (4.6m), 250 amp M-25 MIG gun for .030/.035 in wire
• 10 ft (3 m) work cable and clamp
• Factory-installed dual gas solenoids
• 2- Argon mix regulator/flow gauge w/hose
• New! Factory-installed running gear with EZ-Change™ Low Dual Cylinder Rack with Elevated Gun and Cable Rack
• .030/.035 in reversible drive rolls
• Extra contact tips