Core Bit 5 in.
Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively
shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits
is 4-3/8 inch. The inside core must be removed by the operator before deeper
drilling can be accomplished. The Thick Wall construction is ideal for larger
hammers and more seasoned/cured concrete. A 7-1/2 inch extension is available
to allow for the deeper holes to be drilled. The appropriate (dependant on the
diameter) SDS Plus Drive Shank must be used to drive the Core Bit. Use 48-20-6155
Center Pin and 48-20-6162 Guide Plate for positioning and starting the hole.
Thin Wall Core Bits are available from 1 inch to 6 inch diameters. See Thick
Wall Core Bits for cured concrete and/or larger hammers.
Product Features 5 in. diameter
Usable cutting depth 3 in.
Thin wall
Use with SDS core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.)
*No Sales Tax Except for the State of Wisconsin
- Order Online or call us 1-877-612-3180
Lincoln
Vantage 300 Engine Driven
Housed in a compact, corrosion-resistant
stainless steel case, this rugged welder/generator
features Lincoln Chopper Technology to
deliver great arc starts and a smooth
arc for stick, TIG or wire welding. More
Information
Lincoln
Power Mig 350mp
When you want the flexibility of more
than just a MIG machine, the new Power
MIG 350MP is the choice for you. BUY
Milwaukee
14 In. Cut-Off Machine
The 6176-20 Cut-Off Machine has a powerful
15 amp motor designed for maximum cutting
efficiency, performance and durability.
BUY
